1926 Steamship Discovered in Lake Ontario

0
694

The British steamship Nisbet Grammer, the largest steel steamer to have foundered in Lake Ontario has been discovered by a team of shipwreck explorers.  Dan Scoville, Jim Kennard, Craig Hampton, and Roland Stevens located the steamer thirty miles east of the Niagara River in a depth of over 500 feet of water.   The Nisbet Grammer was enroute from Port Colburne to Montreal with a load of grain when she was struck by the steamship Dalwarnic in a dense fog.

 

Steamer sinks after collision in dense fog

 

The Nisbet Grammer took on a load of grain at Buffalo then passed through the Welland Canal into Lake Ontario and was headed up to the St. Lawrence River in the early morning hours of May 31, 1926. The lake was calm with a slight wind from the northeast.   Around 4:30 AM a dense fog formed on the lake limiting visibility to several hundred feet.  The Grammer could only hear the warning sounds of a ship’s fog horn as it passed in the night.  The steamer continued on but reduced its speed in half to 4.5 knots for the next hour.  As time passed, the fog grew even denser and then at 5:30 AM the sound of a new fog horn was heard almost directly in the path of the Nesbit Grammer.   Within just a few minutes the Canadian steamship Dalwarnic came into view.  The Grammer turned to starboard to avoid the oncoming steamer but there was not enough time for the 253 foot long steamship to avoid the fatal collision.  The Dalwarnic struck the Grammer on the port side near the stern just forward of the boiler house and engine compartment.  A lifeboat from the Nisbet Grammer was deployed as was a yawl from the Dalwarnic in which the crew was able to safely escape from the sinking steamship.  Within less than 15 minutes the Nisbet Grammer hull filled with water and sank stern first into the depths of Lake Ontario.

 

Nisbet Grammer built as a canaller in Birkenhead, England

 

In the early 1920’s large steamships full of grain from the upper lakes had to be unloaded at either Port Colbourne or Buffalo onto smaller vessels to pass through the Welland Canal in order to reach eastern coastal ports.  In December 1922 the Eastern Steamship Company Ltd of St Catharines, Ontario was formed by seven individuals connected with the grain business.  They commissioned the build of ten canallers which would be able to transport grain and also pass through the canal from Lake Erie to Ontario and forego the previous unloading process. G.J. Grammer and his son, Nisbet Grammer, were two of the founders of the new steamship company.  Nisbet was also the president of the Eastern Grain, Mill, and Elevator Corporation of Buffalo.    He was then elected president of the Eastern Steamship Company.  The Nisbet Grammer was built in the shipyard of Cammell Laird and Company of Birkenhead, England and on April 12, 1923 the canaller was launched into the Mersey River.  Just as the new steamship slid down the ways into the Mersey River, the sun came out from under the clouds, which one would have thought a seemingly favorable sign of things to come for the Nisbet Grammer, but her fate would take a different turn.

 

Nisbet Grammer Specifications

 

Length:  253 feet

 

Beam:   43.1 feet

 

Depth:  17.9 feet

 

Gross Tonnage:  1725

 

Net Tonnage:  1110

 

Hold Capacity:  130,000 cubic feet

 

Mean Draft loaded:  14 feet

 

Engine:  Surface-condensing inverted triple-expansion steam engine

 

Maximum Speed:  10 knots

 

The engines were coal-fired fed from wing bunkers.

 

Two large single-ended Scotch boilers (Diameter: 12 ft. x length: 11 ft.) provided a steam pressure of 180 pound per square inch to run the engines.

 

 Search for the Nisbet Grammer

 

In September 2008 Kennard and Scoville began the initial search for the largest steel steamer ever lost in Lake Ontario.  At the time, what was thought to be an easy shipwreck to find turned out to be more of a challenge than they expected.   The search for this steamship did lead to several new discoveries in this area of the lake and more questions than answers into the fate and final resting place of the Nisbet Grammer.  During the next 6 years over 80 square miles of deep lake bottom were surveyed until the discovery by the shipwreck search team in late August.

 

Surveying the Shipwreck

 

Searching for and then surveying a shipwreck in deep depths requires a combination of teamwork and specialized equipment.  The search for the Nisbet Grammer was conducted utilizing an Imagenex Yellow Fin side scan sonar system towed by a 2000 foot steel cable controlled by a specially constructed winch designed by Dan Scoville.  The shipwreck search followed predetermined grid lines in a method similar to mowing a lawn.  Use of an autopilot on Craig Hampton’s boat provided accurate coverage of the targeted search area.  The selected grid was determined by researching the Nisbet Grammer – Dalwarnic Court of Inquiry documents by Jim Kennard.

 

Once the Nisbet Grammer was located the underwater remote operated vehicle (ROV) was deployed to video the shipwreck.  The ROV designed by Scoville uses a special thin fiber optic tether to communicate with the topside electronics and video display.  Using a thin tether has the distinct advantage of minimizing the drag caused by lake currents when deploying very long lengths of cable to reach the deep depths of Lake Ontario.    Over 900 feet of fiber optic tether were used to reach this shipwreck.

 

There were very strong lake currents on the day the team surveyed the steamship with the remote operated vehicle.  It was literally a tug of war as Scoville fought the effect of the lake currents on the long tether to eventually inch the ROV to the hull of the Nisbet Grammer.   Arriving at the base of the port bow of the large steamer’s hull it appeared as a great wall just waiting to be conquered. The ROV ascended over 40 feet to the bow rail of the Grammer.   Peering through the railing was the view of the staircase leading up to the pilot house.  This glimpse of the big steamer was all that would be seen as one of the ROV thrusters failed preventing any forward movement.  Sadly the mission to explore the remaining details of Nisbet Grammer would have to wait for another day.

 

Wreck Commissioner’s Court of Inquiry

 

A formal investigation was held in Toronto on June 15-17, 1926 into the circumstances resulting in the collision of the steamers Dalwarnic and Nisbet Grammer.   The 258 page court transcript provided a detailed account of both vessels leading up to the collision and sinking of the Nisbet Grammer.  It was in this document that the speeds, mileage, and times were stated by both ships’ captains.  This information was used to narrow down the probable search area for the wreck of the Nisbet Grammer.   Mistakes were made by both sides due to the poor visibility created by the dense fog.  As a result of the inquiry, the certificate of the Nisbet Grammer captain was suspended for failing to give specific instructions to his officer.  The first mate was suspended for three months for not having stopped the ship, sounded the alarm signals or awakened and alerted the captain.  The certificate of the captain of the Dalwarnic was suspended for the rest of the 1926 season for failing to exercise the caution which is expected of all seamen.  The Dalwarnic’s first mate was exonerated.

 

The survey of historic shipwrecks in Lake Ontario was funded by a grant from The National Museum of the Great Lakes/Great Lakes Historical Society of Toledo, Ohio.

 

Source: http://www.shipwreckworld.com/